\def\UNX{UN$\star$X} 
\documentclass{report}
\usepackage{svcon2e}
\begin{document}
\pagenumbering{arabic} 
%\tableofcontents 
\chapter{Springer-Verlag New~York Document Styles for Books}
\chapterauthors{Anne Author\\
A. Writer}
\begin{abstract} 
This document describes \LaTeX2e\ styles ``svcon2e,'' Springer-Verlag's style 
package for multiauthored books and ``svsing2e,'' Springer-Verlag's style 
package for single-authored books. These styles are variations of the standard 
``report'' style, and only the differences are noted here. For a complete 
reference, see \LaTeX: {\it A Document Preparation System\/} by Leslie 
Lamport. A short example of a paper prepared with the ``svcon2e'' style may be 
found at the end of this document. Support may be obtained for these macros by 
sending a request by electronic mail to {\tt texhelp@springer-ny.com}.
\end{abstract}  
\section{Starting the Document} 
\label{starting}  
\subsection{Multiauthored Books} Each chapter in a multiauthored book may be 
written by different authors, who write and test their parts as self-contained 
manuscripts. The chapters are then submitted to the editor to be collected 
into the whole.  An author's document should start out as follows. 
\begin{verbatim} 
\documentclass{report} 
\usepackage{svcon2e}
\begin{document}
\pagenumbering{arabic} 
\chapter{Title of your Chapter} 
\chapterauthors{Your Name\\ 
Another Author's Name}  
\begin{abstract} 
The abstract... 
\end{abstract} 
\end{verbatim}  
and should end with 
\begin{verbatim} 
\end{document} 
\end{verbatim}  
All these are standard \LaTeX2e\ commands, except for \verb|\chapterauthors|. 
\verb|\chapterauthors| takes as an argument a list of authors, separated by 
the command \verb|\\|. (Author affiliations will be listed in the front matter 
in a List of Contributors.)  As a side-effect of this command, the chapter 
name and the names of the authors will be placed in the running heads 
automatically.  

\subsection{Single-Authored Books} 
A document that uses the ``svsing2e'' style should start as follows. 
\begin{verbatim} 
\documentclass{report} 
\usepackage{svsing2e}
\begin{document} 
\end{verbatim} and each chapter starts with 
\begin{verbatim} 
\chapter{Chapter Title} 
\end{verbatim} 
Naturally, \verb|\chapterauthors| and the abstract are not necessary for each 
chapter.  In this style, the chapter name and the section name will be placed 
in the running heads.  
\section{Sectioning Commands} 
The following sectioning commands are available in these styles: \verb|\part|, 
\verb|\chapter|, \verb|\section|, \verb|\subsection|, 
\verb|\subsubsection|, \verb|\paragraph|, and \verb|\subparagraph|; to be used 
as described in the \LaTeX\ book. \verb|\part| is only used when the separate 
papers are put together into one document.  By default,  \verb|\part|, 
\verb|\chapter|, \verb|\section|, and \verb|\subsection| are numbered and 
placed in the table of contents. The commands 
\begin{verbatim} 
\setcounter{secnumdepth}{2}% number section and subsections 
\setcounter{tocdepth}{2}% and put them in table of contents \end{verbatim} 
found in the style file may be copied and changed by the editor if desired, 
but should not be changed by the individual authors.  The important words in a 
section argument should be capitalized.  
%\section{Tables} 
%A special type of float, the \verb|stable|, has been added.  For example,  
%\begin{verbatim} 
%\begin{stable}{HYN Common Stock}{rcrp{2in}}
%\multicolumn{1}{c}{Year}& 
%\multicolumn{1}{c}{Price}& 
%\multicolumn1c{Dividend}\\ 
%\TableSubtitleRule 1971& 41--54& \$2.60\\
% 2& 41--54& 2.70& 
%This paragraph is long enough to span at least two lines. 
%\TableFootnote{Prices are in dollars per share} 
%\end{stable} 
%\end{verbatim} will produce table \ref{shorttable} here or at the top of the %next page.  
%\begin{stable}{HYN Common Stock}{rcrp{2in}} \multicolumn{1}{c}{Year}& 
%\multicolumn{1}{c}{Price}& 
%\multicolumn1c{Dividend}\\ 
%\TableSubtitleRule 1971& 41--54& \$2.60\\
% 2& 41--54& 2.70& 
%This paragraph is long enough to span at least two lines. 
%\TableFootnote{Prices are in dollars per share} 
%\label{shorttable} 
%\end{stable}  The first argument to \verb|stable| is the title of the table, 
%the second is the normal preamble that would be specified for a table made 
%with the \verb|tabular| environment.  The body of the \verb|stable| is 
%specified in the same manner as the body of \verb|tabular|.  The command 
%\verb|\TableSubtitleRule| will draw a horizontal rule below the column heads, 
%with the proper vertical spacing.  Note that you have to specify the 
%centering of the column heads, since \TeX\ doesn't know they're different 
%from normal column entries.  \verb|\TableFootnote| takes one argument, the 
%text to %go in the footnote of the table.  It may appear anywhere in the body 
%of the \verb|stable|.  
\section{Acknowledgments} 
Acknowledgments go at the end of a chapter, just before the bibliography. 
\verb|\acknowledgments| is a sectioning command without any arguments, and 
should be followed by a paragraph of text.  
\section{The Bibliography} 
\label{bibl}  
Bibliographies are created with \verb|bibtex|. Generally, you will have a 
central bibliography database, which will have an entry for every paper you 
have ever referenced.  Put the command \verb|\cite{CHERI83}|, in the text of 
the document, to reference the paper ``The Distributed V Kernel and its 
Performance for Diskless Workstations'' by D.R. Cheriton. Then, at the end of 
the document, but before the \verb|\end{document}|, put 
\begin{verbatim} 
\bibliographystyle{alpha} 
\bibliography{master}% name of your bibliography database \end{verbatim}  
Then, run your document through \LaTeX2e.  It will complain \begin{verbatim} 
LaTeX Warning: Citation `CHERI83' on page 1 undefined. 
\end{verbatim} and 
\begin{verbatim} 
No file paper.bbl 
\end{verbatim}  
This will put some entries in the .aux file.  Now run \verb|bibtex paper|, 
which will create the file paper.bbl, by extracting the proper references from 
your bibliographic database.  \verb|bibtex| should not give any error 
messages. Then run \LaTeX2e\ again. Again, the warning 
\begin{verbatim} 
LaTeX Warning: Citation `CHERI83' on page 1 undefined. \end{verbatim} will 
appear.  Run \LaTeX2e\ yet again, and there should be no warnings.  This process 
must be repeated every time a new reference is added to your document, so you 
will probably want to wait until the paper is nearly finished before producing 
the bibliography.  

\subsection{The Bibliography Database} 
The bibliography entry for the preceding example would have been put into the 
file master.bib as follows: 
\begin{verbatim} 
@Inproceedings(CHERI83, key ="CHERI83", 
author="D.R.~Cheriton and W.~Zwaenepoel", 
title="The Distributed V Kernel and its Performance for 
Diskless Workstations", 
booktitle="Proceedings of the 9th Symposium on Operating 
System Principles", 
Organization="ACM", Year=1983) 
\end{verbatim} 
\subsection{What Bibtex Produces}  In the preceding example, the file 
paper.bbl might contain  
\begin{verbatim} 
\begin{thebibliography}{CZ83}  
\bibitem[BL80]{lampson} Ed. B.W.~Lampson. 
\newblock 
{\it Distributed Systems: Architecture and Implementation}. 
\newblock 
Springer-Verlag, 1980.  
\bibitem[CZ83]{cheri83} D.R.~Cheriton and W.~Zwaenepoel. 
\newblock 
The distributed v kernel and its performance for diskless   
workstations. 
\newblock In {\it Proceedings of the 9th Symposium on 
Operating System Principles}, ACM, 1983.  
\end{thebibliography} 
\end{verbatim}  
If you don't have bibtex, this file could be produced by hand.  However, 
bibtex should be part of the \LaTeX2e\ package.  
\section{Producing the Collected Works in the ``svmult2e'' Style}  
This section is for editors collecting chapters from various contributors of a 
multiauthored book. The standard commands up to and including 
\verb|\begin{document}|, and after and including \verb|\end{document}| must be 
removed from each chapter. Then, a master file should be produced, with the 
commands 
\begin{verbatim} 
\documentclass{report} 
\usepackage{svmult2e} 
\begin{document} 
\tableofcontents 
\pagenumbering{arabic}
\end{verbatim} 
followed by an \verb|\include| command for each chapter. Front material may be 
in this master file, or a separate file that's included. \verb|part| commands, 
if desired, should be put in this file, between the \verb|include| commands.  

\subsection{Bibliography} 
In order to produce a bibliography for each chapter in a collected work, each 
chapter must be in a separate file, and be set up as in section \ref{bibl} 
(except the chapter doesn't end in \verb|\end{document}|). Run \LaTeX\ on the 
whole document, then bibtex on each chapter, then re-run \LaTeX\ on the whole 
document twice.  A master bibliography for the entire work may be produced in 
the normal manner, by putting the appropriate commands in the master file and 
running bibtex on the master file.  You can have both bibliographies for each 
chapter and for the entire work at the same time.  
\appendix 
\chapter{Getting Started}
\section{A Short Example}  
This example will serve as a framework from which to start.  \begin{verbatim} 
\documentclass{report} 
\usepackage{svcon2e}
\begin{document} 
\pagenumbering{arabic}
\chapter{Springer-Verlag Multi-Author Style for \LaTeX2e}
\chapterauthors{Anne Author\\
A. Writer}
\begin{abstract} 
This document describes the style ``svcon2e,'' 
Springer-Verlag's style package for 
multiauthored books that are typeset using \LaTeX2e.
\end{abstract}  
\section{Starting the Document} 
Each chapter in a multiauthored book may be written by a 
different author, who write and test their parts as 
self-contained manuscripts.  
\subsection{The Bibliography Database}  
\acknowledgements 
Thanks go to the appropriate people.  
\appendix 
\chapter{Getting Started}
\section{A Short Example}  
\bibliographystyle{alpha} 
\bibliography{master}% name of your bibliography database  
\end{document} 
\end{verbatim}

\section{Submission of \TeX\ Files for Publication}

Authors should submit the following to book editors and, likewise, editors or 
single authors should submit the same to Springer-Verlag.

\vspace{.5pc}
\noindent {\tt
Hardcopy of the chapter (or book),\\
plus a diskette or diskettes of all .tex files,\\
plus all .dvi files,\\
plus all author macro files,\\
as well as originals and a photocopy of all illustrations.
}

\vspace{.5pc}
Authors and editors should remember to keep at least one copy of all files and 
illustrations for themselves.

\section{Indexes}

These style files work for the output of a \LaTeX2e\ index file as well. Follow 
the instructions in the \LaTeX\  book. Authors wishing to generate separate 
author and subject indexes may use the commands
\begin{verbatim}
\begin{theauthorindex} . . .\end{theauthorindex}

\begin{thesubjectindex} . . .\end{thesubjectindex}
\end{verbatim}
in place of the \verb|theindex| commands. This will produce the proper chapter 
heading as well as running heads.
\section{Installing the Style Packages} 
Optimally, the files svsing2e.sty, svcon2e.sty, and svmult2e.sty should be placed in 
the same location as the rest of the style files; on \UNX, that might be 
{\tt /usr/local/lib/tex/macros/svcon2e.sty}. If the user doesn't have the privileges 
to install system software, the environment variable {\tt TEXINPUTS} may be 
set to look for style files wherever desired.  For example, on \UNX, the csh 
command 
\begin{verbatim} 
setenv TEXINPUTS ".:$HOME/lib:/usr/local/lib/tex/macros" \end{verbatim} 
will cause \TeX\ to look in the current directory, the user's private library 
directory, and the default system directory.  svcon2e.sty will be found if 
placed in any of these locations.  Equivalent commands are available on most 
other operating systems.  Directly including the style file into your source, 
or using \verb|\input| or \verb|\include| will not work, because the style 
files contain special commands that are valid only when processed using 
\verb|usepackage|. 
\end{document}
